Share This Page Print

 00921807000  spin_prod_694353401   spin_prod_694353501
Enlarge Image

Craftsman  10'' Table Saw with Laser Trac® (21807)

  Item#  00921807000 | Model#  21807
Close

Create a Review

 
 
 Rating 4.0 | 198 Reviews | Write a review
Reg Price: $349.99
Savings: $100.00
$249.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Base Dimensions (LxW): 22 in x 18 in
Depth (in.): 58
Height (in.): 35
Maixmum Dado Diameter (in): 6
Maximum Cut Depth at 45 (in): 2.5
Maximum Cut Depth at 90 (in): 3
Maximum Dado Width (in.): 0.5
Table Dimensions (LxW): 25 in x 19 5/8 in
Table Dimensions with Extensions: 25 in x 19 5/8 in
Table Height From Floor (In): 34.75
Width (in.): 34.5
Product Overview:
Fence Type - Open text: Locking
General Warranty: One year
Item Weight (lbs.): 63.8
Package Contents: Miter Gauge, Push Block, Blade Wrench, Rip Fence
Portability: Portable
Style: Bench
Table Saw Style: Bench Top Table Saw
Wheeled: Wheels
Color:
Color/Finish: Sliver/grey
Materials & Finishes:
Extension Material: Aluminum
Safety Enhancements:
Overload Protection: Yes
Cord:
Cord Length (ft.): 6
Cord Management: Cord retention system
Cord Type: 14 gauge
Blade:
Blade Diameter (In): 10
Motor-Engine:
Amps: 15.0
Arbor Speed (RPM): 5000
Motor Voltage: 120
Guides & Instructions:
Owner's Manual: Yes
Blade, Use:
Arbor Size: 5/8 in.
General Features:
Table Material: Die cast aluminum
Cutting Tool:
Left Rip Capacity: 24 in.
Maximum Cut Depth: 3 in
Right Rip Capacity: 24 in.
Rip Scale: Yes
Installation:
Assembly Required: Assembly Required
Certifications:
CSA Listed: Yes
ETL Listed: No
UL Listed: Yes
Others:
Condition: New

Overview

Ratings & Reviews

Special

Projects

Product Description

Craftsman 21807 Table Saw: Precision, Speed and a Clean Cut with Every Pass

Ripping sheets of plywood, slotting boards and building perfect boxes, a solid table saw is the center of any shop and strong support for countless projects, which is why the Craftsman 21807 is loaded with features. Line up every cut with the Laser Trac® guidance system and use the smooth gliding t-slot miter gauge and 10 inch carbide tipped blade to slice perfect angles. No matter what kind of work you’ve got ahead, this table saw is ready to lend a hand.

Perfect for long work pieces, the Craftsman 21807 Table Saw features an extendable out-feed support that gives you more control so you can focus on smooth feeding. And if you’ve got a wide cut to make, the extendable support tables and quick moving fence allow you to rip sheets up to 24 inches wide in one smooth, fast motion. Stable as can be, the wide base of this machine handles heavy pieces with ease. A solid fixture to any shop, but always ready to move, this table saw detaches from its base for portability that will keep it moving with you every time duty calls. Dependable, durable and ready to get the job done fast, add this saw to your arsenal and tackle any job with cuts, that can’t be matched.

  • Full kit includes: 36T carbide tipped saw blade, 2 AAA batteries, dust bag, blade wrenches and push stick
  • The Craftsman 21807 Saw’s 15.0 amp motor delivers 5,000 RPM for smooth, fast rips and cuts
  • Wide base means stable support for pieces big and small
  • Clamp together design allows this saw to break down fast
  • Dual roller wheels means more jobsite and shop portability
  • Laser Trac® delivers precision, accuracy and speedy cuts
  • A pair of table side extensions delivers cuts up to 24 in. wide
  • Dust collection bag removes and empties fast
  • Out-feed extension supports long pieces easily
  • Miter gauge is indexed every 15 degrees for fast, accurate cutting
  • On board storage accommodates rip fence, miter gauge
  • Some assembly required

Added on July 26, 2010

 

Overall, others give this:

198 Reviews Write a review
135 Reviewers (68.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise30 found this helpful
Swwbbp
Mar 26 , 2009
For the money, can't be beat.
Not that I love everything about the table. The dust-bag, like all, is a joke. The knive takes some getting used to, and it did need some adjustments out of the box. Pros - sturdy, powerful, portable, accurate. Cons - Blade, dust bag, knife adjustment, won't take a standard Dado. This is not a contractor saw, they make professional grade tools for that. This is a home or medium duty shop saw. The included blade is not the best, so upgrade right away, and take the time to make the adjustments and align. This saw will handly almost anything you throw at it around the house, and not skip a beat. Sure, I'd love a better Dado set-up, but with the money I saved I'll buy a router and table and get more precise cuts anyway. I call it a win win. If you are looking for a heavy duty professional grade saw, this isn't it, but for the average user, it's more than enough.
Criticism42 found this helpful
Chris4311
Jun 20 , 2009
Don't deviate from industry standard
I bought this table saw for around the house use and to do some wood working. It has plenty of power for my needs, is fairly light weight and does an all around okay job. Where it fails it fails miserably. Most notably in the groves for the miter gauge. Industry standard (and what you'll find in the Dewalt and Bosch table saw that Sears sells also) is that the groves are simple rectangles that are 3/4" wide by 3/8 deep. This table saw (and all others by craftsman except for the really high end) are 5/8" x 3/8" and have the addition of 4 of the most annoying little flanges that jut into the groove forcing any guide rail to be 'T' shaped. Apparently, and as far as I can tell, the addition of the flanges is so your miter gauge doesn't fall out in the event that gravity starts working backwards some day. Other than that unlikely event there is NO REASON WHAT SO EVER for these flanges to exist. The miter gauge that they provide is totally worthless with a full 1/16"+ play while in the groove. So precise and accurate cutting is very very difficult on this saw without some serious time commitment by the end user. To make matters even worse Craftsman doesn't make any higher end miter gauges that fits their own odd groove. Though they do make one that fits the industry standard. That in and of itself speaks volumes. This, to me, is very telling of how poorly thought out this tool is and why the flanges serve no purpose. If Craftsman wanted you to only buy Craftsman guide rails or improved miter gauges to use on their Craftsman table saws then wouldn't it follow that they actually sold improved parts to fit their own tool? But no, they don't stock such things for any price and at the same time prevent the end user from using other manufacturers. The end result is that if you intend to use any sort of cross cut jig, box jig or any other jig that requires any sort of accuracy you're going to have to have custom make all of your guide rails instead of just getting them off the shelf. It also means that you won't be able to use any of the high end, highly accurate miter gauges by third party companies like Kreg. Big, big pain the backside here. Craftsman really failed at this to the point that they should have to offer a written apology to all who bought this (and other's like it) table saw. If you're looking for a saw to do some rough carpentry, maybe some simple fence building or maybe even something to just mess around with, then this might be a great saw for you. If you plan to do any sort of box or furniture making, buy something else, anything else and you'll save yourself a lot of headaches. Sorry Craftsman, you did a really bad job on this.
 
Apr 11 , 2014
via sears.com
Overall
Piece of Junk

'Disappointed' does not begin to cover it. The plastic saw base cracked in two places before I could even get it completely assembled. The owner's manual is somewhat ludicrous in it's own right. The list identifies pieces by letter designations--part A is the saw, part B might be the legs, etc. Once you get to the assembly section of the manual, it throws those designations out and starts with completely different designations--numerical. I am returning it, and I have doubtsthat I will ever buy another Craftsman product.


Helpful
(0)
Not Helpful
(1)
Flag this Review
Apr 11 , 2014
via sears.com
Overall
Table saw 21807

Wowed by the laser guide, cuts like a hot knife thru warm butter on pressure treated oak 2x4s and old oak boards too

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Helpful
(0)
Not Helpful
(0)
Flag this Review

gpd101

Glasgow, MO

Apr 2 , 2014
via sears.com
Overall
Great tool for the money

Instructions were easy to follow and assembly went smooth but I found it to be a little tedious. Right out of the box my knives were aligned with the blade and I was able to square the blade up to the table without much problem. Yes the fence does not always lock down square but a quick measurement takes care of that. Seemed to throw a lot of dust even with the bag. I am planning to fabricate a way to put shop vac on it. All in all I'm very happy with it. If you are wanting a table saw but are not wanting to drop a bunch of money then this is the saw for you.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

tedstriker

Hiram, GA

Mar 30 , 2014
via sears.com
Overall
Loose fence, poor extensions, shallow dado

The fence is almost impossible to get straight. Have to measure both front and back repeatedly to make sure its straight before locking it down. The extensions on both sides are week and pretty much guarantee a crooked cut unless again, you measure about 20 times before locking everything down. And they have a hard time holding heavier material. Last, the dado is very shallow. I should have done more research and spent another 200 bucks to get something that wouldn't be such a PITA to operate. Motor seems to be good. On board storage is good, And it is very portable. But the other things I've listed to me just waste my time and frustrate me whenever I try to use the saw.


Helpful
(2)
Not Helpful
(0)
Flag this Review

p7935

Kearny, NJ

Mar 26 , 2014
via sears.com
Overall
Good Buy

The Craftsman 21807 table saw is more than adequate for the homeowner or handyman. The cuts are accurate to within a 1/16 of an inch. I would recommend the purchase of a fine tooth blade for precise and finish cuts. The only negative is the instruction/assembly manual. It would be more user friendly the parts were labeled better.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

glfrye3

Quitman, MS

Mar 23 , 2014
via sears.com
Overall
the craftsmen quality saw

great for a good price- box came a bit damaged- but product was still in good condition- ggreat for flooing, siding, roofing- shevling and other various projects on thwe construction site

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Helpful
(0)
Not Helpful
(0)
Flag this Review

mrush1965

Coos Bay, OR

Mar 19 , 2014
via sears.com
Overall
Nice saw

So far I am very pleased with this saw. It is perfect for the things I do at home. It struggles a bit ripping dimensional lumber but have had no problem with 3/4 plywood or paneling I have cut. My only reason for not giving 5 stars is the table is a bit rough and so the wood doesnt slide real smoothly at times.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

Home-User

Kings Park, NY

Mar 7 , 2014
via sears.com
Overall
Excellent 10" Table Saw

The Craftsman 10" Table Saw with Laser Trac? (21807) is well made and should provide excellent service. The 2 side extensions are very useful for cutting wide sheets, especially since the rip guide can be installed on either side extension.


Helpful
(1)
Not Helpful
(0)
Flag this Review
Feb 24 , 2014
via sears.com
Overall
Just couldn't get it to function well

I bought this saw on sale, and looked forward to starting many of the projects I had waiting and which required a table saw. In the end, I returned it after 3 weeks and purchased a different Craftsman table saw. Assembly was not difficult, but is somewhat involved. I'd estimate that it took a couple of hours to put together. One mistake I made was in assuming that all of the lower cross supports for the stand were mounted at the same level. Reading through other reviews, it seems that other folk made this same mistake. But, one of the supports in fact mounts lower on the stand than the other three. The stand is very sturdy when assembled correctly. The dust collector works surprisingly well I returned the saw because it was not possible to align the blade with the fence. An additional problem was that the knife could not be brought into alignment with the blade. Together, these two issues resulted in binding of the cut piece between the spinning blade and the fence. In total, I spent over 2 days attempting to make the saw work safely but could not.


Helpful
(4)
Not Helpful
(1)
Flag this Review

Brian22Crosby

San Tan Valley, AZ

Feb 18 , 2014
via sears.com
Overall
Wish I didn't throw away the box....

I purchased this saw for woodworking as a hobby. Assembly was not as bad as some have claimed. If putting this saw together is difficult for you, maybe you aren't qualified to use it. The saw cuts well enough. Beyond that there isn't anything good about this saw. The rip fence doesn't stay square to the blade. I have to measure and adjust every time I move the fence. The miter track is the absolute worst feature about this saw. It is 5/8" instead of the industry standard 3/4", so forget using any jigs or crosscut sleds. It really isn't even a "T" track. there are a couple tabs in the front and back that make it almost impossible to fabricate your own slides. The provided miter gauge doesn't even fit snuggly inside the track. The "dust collection" is horrible! It traps the dust just fine but it keeps it all by the motor housing and doesn't allow for a shop vac to be attached. The blade height adjustment doesn't lock down. Those are pretty much all of my dislikes for this table saw. I'd return it if I still had the box.If you are reading this, do yourself a favor and continue your research. Even if you have to wait and spend a little more money on a different saw, it'll be worth it!


Helpful
(9)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   30-Apr-2014 See details.
  • MAX Member Exclusive. Choose FREE Store Pickup and Get 5% back in points! Offer ends   30-Jun-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Get this Tool Item at a limited time Hot Price! Sold By Sears Offer ends   03-May-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x