Share This Page Print

 00921807000  spin_prod_694353401   spin_prod_694353501
Enlarge Image

Craftsman  10'' Table Saw with Laser Trac® (21807)

  Item#  00921807000 | Model#  21807
Close

Create a Review

 
 
 Rating 4.0 | 208 Reviews | Write a review
Reg Price: $349.99
Savings: $100.00
$249.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Base Dimensions (LxW): 22 in x 18 in
Depth (in.): 58
Height (in.): 35
Maixmum Dado Diameter (in): 6
Maximum Cut Depth at 45 (in): 2.5
Maximum Cut Depth at 90 (in): 3
Maximum Dado Width (in.): 0.5
Table Dimensions (LxW): 25 in x 19 5/8 in
Table Dimensions with Extensions: 25 in x 19 5/8 in
Table Height From Floor (In): 34.75
Width (in.): 34.5
Product Overview:
Fence Type - Open text: Locking
General Warranty: One year
Item Weight (lbs.): 63.8
Package Contents: Miter Gauge, Push Block, Blade Wrench, Rip Fence
Portability: Portable
Style: Bench
Table Saw Style: Bench Top Table Saw
Wheeled: Wheels
Color:
Color/Finish: Sliver/grey
Materials & Finishes:
Extension Material: Aluminum
Safety Enhancements:
Overload Protection: Yes
Cord:
Cord Length (ft.): 6
Cord Management: Cord retention system
Cord Type: 14 gauge
Blade:
Blade Diameter (In): 10
Motor-Engine:
Amps: 15.0
Arbor Speed (RPM): 5000
Motor Voltage: 120
Guides & Instructions:
Owner's Manual: Yes
Blade, Use:
Arbor Size: 5/8 in.
General Features:
Table Material: Die cast aluminum
Cutting Tool:
Left Rip Capacity: 24 in.
Maximum Cut Depth: 3 in
Right Rip Capacity: 24 in.
Rip Scale: Yes
Installation:
Assembly Required: Assembly Required
Certifications:
CSA Listed: Yes
ETL Listed: No
UL Listed: Yes

Overview

Ratings & Reviews

Special

Projects

Product Description

Craftsman 21807 Table Saw: Precision, Speed and a Clean Cut with Every Pass

Ripping sheets of plywood, slotting boards and building perfect boxes, a solid table saw is the center of any shop and strong support for countless projects, which is why the Craftsman 21807 is loaded with features. Line up every cut with the Laser Trac® guidance system and use the smooth gliding t-slot miter gauge and 10 inch carbide tipped blade to slice perfect angles. No matter what kind of work you’ve got ahead, this table saw is ready to lend a hand.

Perfect for long work pieces, the Craftsman 21807 Table Saw features an extendable out-feed support that gives you more control so you can focus on smooth feeding. And if you’ve got a wide cut to make, the extendable support tables and quick moving fence allow you to rip sheets up to 24 inches wide in one smooth, fast motion. Stable as can be, the wide base of this machine handles heavy pieces with ease. A solid fixture to any shop, but always ready to move, this table saw detaches from its base for portability that will keep it moving with you every time duty calls. Dependable, durable and ready to get the job done fast, add this saw to your arsenal and tackle any job with cuts, that can’t be matched.

  • Full kit includes: 36T carbide tipped saw blade, 2 AAA batteries, dust bag, blade wrenches and push stick
  • The Craftsman 21807 Saw’s 15.0 amp motor delivers 5,000 RPM for smooth, fast rips and cuts
  • Wide base means stable support for pieces big and small
  • Clamp together design allows this saw to break down fast
  • Dual roller wheels means more jobsite and shop portability
  • Laser Trac® delivers precision, accuracy and speedy cuts
  • A pair of table side extensions delivers cuts up to 24 in. wide
  • Dust collection bag removes and empties fast
  • Out-feed extension supports long pieces easily
  • Miter gauge is indexed every 15 degrees for fast, accurate cutting
  • On board storage accommodates rip fence, miter gauge
  • Some assembly required

Added on July 26, 2010

 

Overall, others give this:

208 Reviews Write a review
140 Reviewers (67.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise30 found this helpful
Swwbbp
Mar 26 , 2009
For the money, can't be beat.
Not that I love everything about the table. The dust-bag, like all, is a joke. The knive takes some getting used to, and it did need some adjustments out of the box. Pros - sturdy, powerful, portable, accurate. Cons - Blade, dust bag, knife adjustment, won't take a standard Dado. This is not a contractor saw, they make professional grade tools for that. This is a home or medium duty shop saw. The included blade is not the best, so upgrade right away, and take the time to make the adjustments and align. This saw will handly almost anything you throw at it around the house, and not skip a beat. Sure, I'd love a better Dado set-up, but with the money I saved I'll buy a router and table and get more precise cuts anyway. I call it a win win. If you are looking for a heavy duty professional grade saw, this isn't it, but for the average user, it's more than enough.
Criticism42 found this helpful
Chris4311
Jun 20 , 2009
Don't deviate from industry standard
I bought this table saw for around the house use and to do some wood working. It has plenty of power for my needs, is fairly light weight and does an all around okay job. Where it fails it fails miserably. Most notably in the groves for the miter gauge. Industry standard (and what you'll find in the Dewalt and Bosch table saw that Sears sells also) is that the groves are simple rectangles that are 3/4" wide by 3/8 deep. This table saw (and all others by craftsman except for the really high end) are 5/8" x 3/8" and have the addition of 4 of the most annoying little flanges that jut into the groove forcing any guide rail to be 'T' shaped. Apparently, and as far as I can tell, the addition of the flanges is so your miter gauge doesn't fall out in the event that gravity starts working backwards some day. Other than that unlikely event there is NO REASON WHAT SO EVER for these flanges to exist. The miter gauge that they provide is totally worthless with a full 1/16"+ play while in the groove. So precise and accurate cutting is very very difficult on this saw without some serious time commitment by the end user. To make matters even worse Craftsman doesn't make any higher end miter gauges that fits their own odd groove. Though they do make one that fits the industry standard. That in and of itself speaks volumes. This, to me, is very telling of how poorly thought out this tool is and why the flanges serve no purpose. If Craftsman wanted you to only buy Craftsman guide rails or improved miter gauges to use on their Craftsman table saws then wouldn't it follow that they actually sold improved parts to fit their own tool? But no, they don't stock such things for any price and at the same time prevent the end user from using other manufacturers. The end result is that if you intend to use any sort of cross cut jig, box jig or any other jig that requires any sort of accuracy you're going to have to have custom make all of your guide rails instead of just getting them off the shelf. It also means that you won't be able to use any of the high end, highly accurate miter gauges by third party companies like Kreg. Big, big pain the backside here. Craftsman really failed at this to the point that they should have to offer a written apology to all who bought this (and other's like it) table saw. If you're looking for a saw to do some rough carpentry, maybe some simple fence building or maybe even something to just mess around with, then this might be a great saw for you. If you plan to do any sort of box or furniture making, buy something else, anything else and you'll save yourself a lot of headaches. Sorry Craftsman, you did a really bad job on this.
 

MrBarton

Fort Worth, TX

Jul 15 , 2014
via sears.com
Overall
What Happened?

Grandpa had a Craftsman table saw. Dad had one. Father in law had one. I used them all, and thought there were none better. 20 years later, as a homeowner, I bought my own...this one. I can't help but wonder: what happened to Sears quality? Absolutely no evidence of quality in this saw! Cheap slot for the miter guide, sloppy indent for the miter angle, sloppy fence clamp, non-flush rest plate that fits around the blade, overall a waste of money. While pushing it across my concrete driveway, the wheel caught the expansion joint and all four corners of the plastic base broke away, completely separating the saw from the rolling base! The final straw: after 6 years of occasional use, the motor locked up. After removing and inspecting, I found the plastic fan melted into a clump of plastic wrapped around the armature. The rear bearing had failed some time ago, as evidenced by the rub wear in the stator. A replacement motor costs $162 as of today. I'll go to *****.


Helpful
(3)
Not Helpful
(0)
Flag this Review

guardian6910

California City, CA

Jun 16 , 2014
via sears.com
Overall
Poor quality

Never even got to use the saw. After the stand was assembled I placed the saw on the stand and went to bolt it on. There was a crack in the plastic base of the saw that went front the bolt hole lug all the way up to the top of the saw.


Helpful
(5)
Not Helpful
(0)
Flag this Review

disappointedfan

Chesapeake, VA

May 30 , 2014
Overall
2 broken table saws

This was my first table saw ever. Sadly, the first one I brought home from the store had a cracked base and a broken guide. I took it back to the store and they exchanged it. That should have been a sign. Today my second one broke. Two broken saws and many other broken/crappy Craftsman tools in my garage. Don't bother with this saw or any other Craftsman product.


Helpful
(5)
Not Helpful
(0)
Flag this Review

brooker1027

Colorado Springs, CO

May 18 , 2014
via sears.com
Overall
Good starter saw or if you're doing general woodcutting

I'm looking for an upgrade to do actual woodworking. The primary issue with this saw is that if you're looking to make accurate crosscuts or miter cuts, and you're looking to use any accessory that requires the industry standard 3/4 inch miter slot, this saw has a 5/8 inch miter slot. NONE of the available fence or miter jigs on the market will fit this saw as they are all designed for the industry standard 3/4 inch miter slot. The miter gauge is sloppy in the undersized slot, and the fence requires too much fiddling to align with the fence, making accurate miter and crosscuts for woodworking practically impossible. If you upgrade the blade, make sure it's a thin kerf design as the riving knife is too narrow for a quality blade with a full 1/8 inch kerf. If you're looking for a saw to do general construction, this is a great saw, but it's not a woodworker's saw.

I would recommend this product to a friend.

Helpful
(6)
Not Helpful
(0)
Flag this Review

Builder49770

Petoskey, MI

May 16 , 2014
via sears.com
Overall
Hardly contractor grade

I bought this to replace my last Craftsman table saw and thought I was upgrading to one more durable. The stand is the only thing more durable but the wheels should have two bolts not one, they keep wanting to rotate. The bevel and blade control are one in the same and plastic gears on top of that, talk about a step backwards. The out feed is lightweight metal and bends under the weight of a plywood sheet. If you're building bird houses it's good. If you're like me and use it for every day use, keep looking until Sears starts building them like they used to.


Helpful
(4)
Not Helpful
(0)
Flag this Review

1txchick

San Antonio, TX

May 8 , 2014
via sears.com
Overall
my new toy

I really like this table saw, its convenient, portable, takes very little space.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(1)
Flag this Review
May 1 , 2014
via sears.com
Overall
Lightweight versatile saw

Was using an older shaft drive Craftsman table saw until the shaft FINALLY broke, she was a beast but I needed to find a replacement since the shaft itself was costly. I decide to modernize with this model. Initially after putting it together , which was easy (30-40 mins), I became a bit concerned with the difference in sturdiness compared to my old saw which was all cast iron and heavy steel. However although the use of aluminum and plastic is worrisome I soon discovered it added to the saw's versatility in movement flexibility. It has extensions on both sides and the rear for larger pieces of lumber. The motor is capable for everyday use as well. As a site saw its great, if you need to cut beefier pieces of lumber in a workshop setting the larger model is recommended. Only negatives are the catch bag only catches maybe 50-60% of saw dust the rest comes out of every opening in the base and the laser site is an extra you don't need. Overall I am pleasantly surprised and pleased with this purchase.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(1)
Flag this Review

mdb007

Avon Lake, OH

Apr 29 , 2014
via sears.com
Overall
Height adjustment broke after 1 month of use.

This was given to me in early january as a birthday present. the few time i used it, it seemed to work well for a few cuts in february although even taking into account the kerf of blade, the cuts' can be off by a 1/16" using the building in ruler, so I measure 3 times and check where blade will cut wood. Now for the past month and half we have been remodeling kitchen and it has been used a lot more. Imagine to my surprise when sunday the blade height adjustment stopped working! Blew the sawdust out with compressor and can't see anything wrong with it. It just will not engage up or down. However I unplugged the saw and was able to pull it up slowly and it did stay. I have had many craftsman power tools over the years and really disappointed with this. one. it's under warranty but will now have to get it repaired.


Helpful
(6)
Not Helpful
(0)
Flag this Review

justpluggingalong

Albany, OR

Apr 21 , 2014
via sears.com
Overall
so far so good

can definitely be a great table saw was impressed with the noise level. My other saw's bearing were going and then it started to burn, was time to replace and this one was the best I could find after comparing.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review
Apr 17 , 2014
via sears.com
Overall
Good garage tool

Its wheels help too move it from one place to other. Very stable table.

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Helpful
(1)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Aug-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x